Home / St. Louis County / University City
Electrician in University City
University City is a regular run out of O’Fallon, MO. Inspection and code-correction work shows up often in this part of the metro.
Serving University City, MO and the rest of St. Louis County.
Owner-operated. Licensed, bonded and insured, with workers compensation coverage.
5.0 from 94 Google reviews · BBB A+
What the houses here need
University City sits in St. Louis County, which means older housing stock, where the knob-and-tube, cloth wire and fuse-box conversions come from, and inspections that vary by municipality.
That shapes the work. Clint measures before he quotes, tells you what the reading says, and fixes the thing that is actually wrong. If the service is fine and one circuit is overloaded, you hear that.
Permits are pulled where University City and St. Louis County require them, and the work is left ready for inspection. Requirements genuinely differ between municipalities here, which is worth knowing before a closing.
Two-prong outlets and what they mean in {city}
An outlet with two slots has no equipment ground, which means a fault has no low-resistance path back and the breaker may never see it. Retrofitting a three-prong receptacle onto two-wire cable produces the appearance of a ground without the function, which is worse because it reads as safe to anyone checking.
Testing tells you which you have in seconds. Where a real ground cannot be run, GFCI protection with the receptacle labeled is what the code allows, and you are told which route applies to your circuit rather than sold the larger one.
Why the panel label matters more than people think
An unlabeled panel costs money every time anyone works on the house, because the first twenty minutes of every visit goes to finding out what feeds what. In University City’s older stock the labels are frequently from two owners ago and describe rooms that have since been remodelled.
Every circuit gets identified and labeled as part of the work, not as an extra. It is also one of the first things a municipal inspector looks for.
Heat is the symptom that does not wait
A warm cover plate, a hot breaker, or a burning smell means something has already overheated, and in almost every case the cause is a termination arcing rather than a conductor failing in the wall.
Those move to the front of the day. The first action is making it safe, which sometimes means isolating a circuit at night and repairing it properly in daylight rather than improvising in the dark.
What a load calculation costs versus what it saves
A calculation is an hour and some arithmetic. A service upgrade is a permit, a utility disconnect, new equipment and an inspection. Doing the first before committing to the second is the single highest-value hour in this trade.
Across University City a meaningful share of upgrade enquiries end with the calculation showing the service carries what the house asks of it, and the real answer being one dedicated circuit.
Permits are about the record as much as the rules
A permitted and inspected job leaves a paper trail that an insurer, a buyer’s inspector or the next owner can read. Unpermitted work that is physically fine still shows up as a problem at a closing.
So work needing a permit gets one from University City, and work needing an inspection is left ready for it with the panel labeled and junctions accessible.
Older panels that have been added to repeatedly
Houses around University City frequently carry a panel that has been modified three or four times: tandem breakers where the bus was not rated for them, doubled lugs, and circuits spliced inside the cabinet.
Each of those is a specific defect with a specific remedy rather than a reason to replace everything. With the cover off you find out which ones are actually present.
Why a second opinion on a service upgrade is reasonable
A service upgrade is one of the larger single line items in home maintenance, and it is quoted by people whose income depends on it being needed. Asking for the load calculation behind the recommendation is a fair question.
If a number was never produced, the recommendation was a guess. You get the calculation here whether the answer favours the larger job or not.
“Clint came out installed me a large 200 amp panel put some new dedicated lines in my basement and garage he did great clean work all inspections passed he was thorough and knowledgeable. I will have him back out again.”
Jason Holtzman · Google review
What gets done in University City
- Panel and meter
Breakers, bus, meter base and the service entrance, which takes the weather directly.
- Symptoms
Warm plates, flickering, repeated trips and partial power loss, each with its own short list of causes.
- Inspections
Pre-sale, occupancy and insurance inspections, with a written finding you can act on.
- Charging and cooking
Chargers, induction, ovens and ranges, matched to plates and to the service.
- Switching and outlets
Three-ways wired correctly, receptacles terminated under the screws, protection per location.
- When the lights go out
Standby power scoped to a list you wrote rather than to a brochure.
Work done in University City
Nearby towns
Clint covers the whole county out of O’Fallon. The housing stock shifts across these towns, and so does what an inspector looks at first.
Every service is listed on the services page, the rest of the area on St. Louis County, and finished work in the gallery. To book, pick a day.
Questions worth asking first.
Do I need a bigger service, or just more space in the panel?
Those are different problems. A full panel with spare capacity takes a sub-panel or tandem breakers. A panel that is out of capacity takes a service upgrade, and the load calculation tells us which one you have before anything is ordered.
Do I need a permit for panel work?
In every municipality in this footprint, yes, plus an inspection and a scheduled utility disconnect. That is why a panel change is a planned day rather than a same-day call.
My lights flicker across the whole house. Is that urgent?
Potentially. A whole-house flicker, especially when a large motor starts, can mean a failing service neutral, which can damage equipment. That gets measured at the panel before anything inside is touched.
Who actually shows up?
Clint Ehman. Infinity Electric is owner-operated, so the person who answers the phone is the person who measures your panel and pulls the permit. There is no dispatcher and no commissioned salesman.
Are you licensed and insured?
Licensed, bonded and insured, with workers compensation coverage, and accredited A+ with the BBB since 2022.
Electrical work in University City.
Call and describe the symptom. You will get a reading and a straight answer about what it means.
Mon-Thu 8-5 · Fri 8-4 · Sat 10-3. A written note works too.

