Home / Safety / Home Inspection Electrical Corrections
Home Inspection Electrical Corrections
Faults are found with measurement, not by replacing parts in order. An inspector’s list is not an opinion, and the fastest way through it is to correct the items and get them re-inspected.
Home Inspection Electrical Corrections in O’Fallon and across St. Charles, St. Louis, Lincoln and Warren counties.
Clint Ehman, seventeen years in the trade, running Infinity Electric out of O’Fallon since 2022.
5.0 from 94 Google reviews · BBB A+ since 2022
What this work actually involves
You get told what the reading was and what it means, including when the honest answer is a small repair.
The order is always the same: reproduce it, measure it, say what the number means, fix the thing the number points at. Nothing gets bundled on the way past.
Permits and inspections happen where the municipality requires them, and the panel is left labeled. One person does all of it.
When people call about this
- A burning smell near a panel or outlet
- A breaker that will not stay set
- Lights flickering on unrelated circuits
- An inspection report before a closing
Why people choose Clint for it
What the reviews keep mentioning is being told what the problem actually was. That is what an owner-operated shop can do and a dispatch model structurally cannot.
Seventeen years in the trade, 5.0 from 94 Google reviews, and BBB accredited A+ since December 2022.
Where this is done
O’Fallon and the surrounding St. Charles County suburbs, out through St. Louis County and St. Louis City, and into Lincoln and Warren counties. Roughly a fifty mile radius.
See the full service area, or the rest of our safety & code work.
The symptoms that should never wait
Heat at a cover plate, a smell of hot plastic, and a breaker that will not stay set are the three that justify a same-day call. All three describe energy going somewhere it should not.
Flickering across unrelated circuits belongs in the same group, because it points at the service or the neutral rather than at one room.
How a fault is actually found
Diagnosis is a process of division. Measure at the panel, measure at the point of failure, then split the circuit until the fault is on one side of the split.
That is slower to describe than swapping parts and much faster in practice, because it ends with an answer instead of a list of things that were not the problem.
What an inspection covers and what you get
Grounding and bonding, protection in wet locations, panel condition with the cover off, terminations at large loads, device condition, and the specific hazards the housing stock here produces: aluminum branch wiring, knob-and-tube, obsolete panels.
You get a written list with readings, separated into what is a hazard, what is a code item, and what is simply old and working. Buyers, insurers and inspectors all ask for different ones.
What gets left behind when the work is done
A labeled panel, accessible junctions, the old parts if you want to see them, and a straight account of anything found along the way that was not part of the call.
Where something else was found, you get told what it is and whether it needs doing now, later or not at all. That third answer is a real answer and it gets used.
Who actually does the work
Clint Ehman does the diagnosis and the repair himself. There is no salesman writing a scope for a technician to execute, and nobody paid on what the visit totals.
Seventeen years in the trade, four of them running his own shop out of O’Fallon, licensed, bonded and insured with workers compensation coverage, 5.0 from 94 Google reviews, and A+ BBB accreditation held since 2022.
“Infinity came out for same day service after an electric line had been cut in my yard. He was able to locate and correct it very quickly, eliminating any risk of injury or additional power outage.”
Melissa Johnson · Google review
How the visit goes
- The call
What you are seeing, smelling or hearing, and when it started. Heat and smell move you up the day.
- The measurement
Reproduce the symptom, then divide the circuit until the fault is on one side of the split. Measurement at the panel and at the point of failure.
- The finding
What it was, with the reading. Including when the answer is one loose connection rather than the rewire you were braced for.
- The work
Correction scoped to the finding, permitted and re-inspected where the municipality requires it, and documentation you can hand to an inspector or a buyer.
What the job includes
- Reproducing the symptom before anything is replaced
- Measurement at the panel and at the fault
- A plain-words finding with the number that supports it
- Correction scoped to the finding, nothing bundled
- Permit and re-inspection where a municipality requires it
- Documentation you can hand to an inspector or a buyer
What it does not
- Replacing parts that test sound
- Opinions where a measurement is possible
- Work outside electrical, though we will say who to call
Anything outside electrical, you will be told who to call rather than sold it. Recent jobs are worth a look before you call.
Related safety & code work
Home Inspection Electrical Corrections across the metro
The same job is not the same job in every part of this metro. Same trade across five jurisdictions out of O’Fallon, with a different inspection process in each.
St. Charles County
St. Charles County is mostly 1990s and 2000s subdivisions. The wiring is modern and the services were sized before anyone owned an electric car or finished a basement, so capacity is the usual constraint rather than condition.
St. Louis County
This is where the genuinely old wiring lives: cloth insulation, no equipment ground, fuse panels and the mid-seventies aluminum. Each has an accepted remedy rather than requiring a whole-house rewire.
St. Louis City
St. Louis City is century brick with shared walls and basement panels that have been added to five times. Code corrections and occupancy inspections are the common call.
The whole working radius is mapped on the service areas page.
Questions worth asking first.
Can you handle the items on my inspection report?
Yes. Send the report. The items get corrected, permitted where the municipality requires it, and re-inspected so the file closes before your closing date.
My lights flicker across the whole house. Is that urgent?
Potentially. A whole-house flicker, especially when a large motor starts, can mean a failing service neutral, which can damage equipment. That gets measured at the panel before anything inside is touched.
Half my house has no power. Is that a breaker?
Usually not. Losing roughly half the house is the signature of a lost leg of the service or a failing neutral, and it gets measured at the service entrance first.
What do your reviews say?
5.0 from 94 Google reviews, and A+ accreditation with the BBB held since 2022. The reviews are on the reviews page with links to where each was posted.
Who actually shows up?
Clint Ehman. Infinity Electric is owner-operated, so the person who answers the phone is the person who measures your panel and pulls the permit. There is no dispatcher and no commissioned salesman.
Worth a call before it gets worse.
Heat, a smell or a repeated trip is the house reporting something real. Home Inspection Electrical Corrections in O’Fallon and across the metro.
Reachable Mon-Thu 8-5, Fri 8-4, Sat 10-3. Outside those hours, leave the details.