Home / Outlets / Outlet Relocation
Outlet Relocation
Dedicated means dedicated: one appliance, one circuit, no sharing. GFCI and AFCI requirements changed for good reasons, and they are the cheapest safety work available in a house.
Outlet Relocation in O’Fallon and across St. Charles, St. Louis, Lincoln and Warren counties.
No dispatcher and no commissioned salesman. Seventeen years in the trade, four of them on his own.
5.0 from 94 Google reviews · BBB A+ since 2022
What this work actually involves
The circuit gets traced before anything is added, so a new outlet does not quietly put an old circuit over its limit.
First the reading, then the explanation, then the repair scoped to what was actually found. If that turns out smaller than the job you called about, that is what you are charged for.
Work needing a permit gets one and work needing an inspection is left ready for it. There is no handoff between whoever quotes and whoever fixes, because they are the same person.
When people call about this
- Loose receptacles that spark
- A tripping kitchen circuit
- Extension cords as permanent wiring
- Outlets with no ground
Why people choose Clint for it
One person does the diagnosis and the repair, so nothing is lost between a salesman and a technician, and nobody is paid to sell past the finding.
Seventeen years in the trade, four of them running his own shop, 5.0 from 94 Google reviews, and an A+ BBB accreditation held since 2022.
Where this is done
Thirty towns across five jurisdictions, worked out of O’Fallon. The housing stock and the inspection process both change as you move across them.
See the full service area, or the rest of our outlets & circuits work.
Box fill, and why tidy work still fails
Every box has a volume, and every conductor, device and clamp inside it counts against that volume. Overfilled boxes are the commonest reason competent-looking work fails inspection.
It matters beyond the paperwork: crowded conductors are harder to terminate well and run hotter, and that is where failures begin.
GFCI, AFCI and what each is for
GFCI protects people: it watches for current leaving the circuit through something that is not the neutral, which is what an electric shock looks like electrically. It belongs where water is.
AFCI protects the building: it listens for the signature of an arc, which is what a loose connection or a damaged cable does before it starts a fire. Bedroom circuits call for it for that reason.
Moving a device without opening the wall
Relocating an outlet or a switch is a fishing job. Whether it can be done without opening drywall depends on the framing, the insulation and whether there is a fire block in the cavity.
You get told which it is before it starts. Where the wall has to be opened, the patch is left ready for paint rather than left as a hole.
What makes this harder in older housing stock
Across this metro the recurring complications are predictable: no equipment ground, aluminum branch wiring from the mid-seventies, knob-and-tube buried in blown-in insulation, panels that have been added to several times, and splices in places the code has not allowed for decades.
Those turn a simple job into a decision about scope. The decision gets put to you with the reading behind it rather than made quietly and billed.
Who actually does the work
Clint Ehman does the diagnosis and the repair himself. There is no salesman writing a scope for a technician to execute, and nobody paid on what the visit totals.
Seventeen years in the trade, four of them running his own shop out of O’Fallon, licensed, bonded and insured with workers compensation coverage, 5.0 from 94 Google reviews, and A+ BBB accreditation held since 2022.
“Clint did an excellent job installing two bathroom exhaust fans. He installed high-quality fans that were far superior to the ones I had purchased from a big box store. I highly recommend his services.”
David Hinners · Google review
How the visit goes
- The call
What tripped, or what you want to plug in that there is nowhere to plug in.
- The measurement
Tracing the circuit to find everything already on it, then checking box fill, gauge and existing protection.
- The finding
Whether this is a new dedicated circuit or a device swap, and whether protection needs upgrading for the location.
- The work
Circuit run and terminated properly, devices installed tight rather than backstabbed, protection matched to location, and every outlet on the circuit tested.
What the job includes
- Tracing the existing circuit before anything is added
- Correct protection for the location, GFCI or AFCI as the code calls for
- Dedicated circuits where an appliance needs one
- Box fill and wire gauge checked and corrected
- Devices installed level and tight, not backstabbed
- Testing at every outlet on the circuit
What it does not
- Appliance installation beyond the connection
- Cabinet or countertop modification
- Low-voltage data unless it is part of the same job
If the fix belongs to another trade, you get the name of one rather than a price from this one. There is a gallery of finished jobs, and a form if that is easier than calling.
Related outlets & circuits work
Outlet Relocation across the metro
Where the house is changes what the work involves. What an inspector looks at first differs by address here, which shapes the job as much as the house does.
Lincoln County
Distance is the design factor out here. A run to a shop or a well house is often hundreds of feet, which makes voltage drop a real calculation rather than a textbook one.
Warren County
Backup power is a more common purchase out here, and when a well pump is the water supply the loads that matter are not the kitchen.
St. Charles County
Twenty and thirty year old subdivisions where nothing has failed and the service is simply at its limit. That is the recurring call.
Every municipality covered is listed on the service areas page.
Questions worth asking first.
Why does my kitchen breaker keep tripping?
Usually too much on one circuit rather than a fault. Tracing the circuit shows what is sharing it, and a dedicated circuit for the heavy appliance normally ends it.
Do I need GFCI everywhere?
Where the code calls for it: kitchens, baths, garages, outdoors and unfinished basements. It is the cheapest safety work in a house and the easiest to add.
Why is my outlet warm?
Heat at a device means a loose or backstabbed termination arcing, and it does not resolve itself. That one gets looked at promptly rather than scheduled out.
How long have you been doing this?
Clint has seventeen years in the trade and has been running his own shop out of O’Fallon since 2022.
What do your reviews say?
5.0 from 94 Google reviews, and A+ accreditation with the BBB held since 2022. The reviews are on the reviews page with links to where each was posted.
Talk to the person who will do the work.
No dispatcher, no salesman. Clint takes the call and Clint does the job. Outlet Relocation in O’Fallon and across the metro.
Reachable Mon-Thu 8-5, Fri 8-4, Sat 10-3. Outside those hours, leave the details.