Home / Outlets / Dedicated Circuit Installation
Dedicated Circuit Installation
Adding an outlet is cheap. Adding it to the wrong circuit is expensive later. GFCI and AFCI requirements changed for good reasons, and they are the cheapest safety work available in a house.
Dedicated Circuit Installation in O’Fallon and across St. Charles, St. Louis, Lincoln and Warren counties.
Clint Ehman does the work himself. Seventeen years in the trade, Infinity Electric since June 2022.
5.0 from 94 Google reviews · BBB A+ since 2022
What this work actually involves
Protection is matched to the location, which is what the code is actually asking for when it calls out a GFCI.
Clint measures before he quotes. The reading comes first, then what it means, then the one repair that solves it. If the honest answer is smaller than what you called about, that is the answer you get, even when the bigger job pays better.
Work that needs a permit gets one, and work that needs an inspection is left ready for it. One person does the diagnosis and the repair, so nothing is lost between a salesman and a technician.
When people call about this
- A new appliance with no circuit
- Outdoor outlets without covers
- Loose receptacles that spark
- A tripping kitchen circuit
Why people choose Clint for it
One person does the diagnosis and the repair, so nothing is lost between a salesman and a technician, and nobody is paid to sell past the finding.
Seventeen years in the trade, four of them running his own shop, 5.0 from 94 Google reviews, and an A+ BBB accreditation held since 2022.
Where this is done
A roughly fifty mile working radius from O’Fallon, covering thirty municipalities across five jurisdictions in the St. Louis metro.
See the full service area, or the rest of our outlets & circuits work.
Dedicated circuits and why they exist
Some appliances do not share. A microwave, a disposal, a dishwasher and a refrigerator each expect their own circuit, and a kitchen wired to an older standard usually has fewer circuits than the appliances now in it.
That is why a kitchen breaker trips when the microwave and the kettle run together. It is not a fault; it is arithmetic, and a dedicated circuit ends it.
GFCI, AFCI and what each is for
GFCI protects people: it watches for current leaving the circuit through something that is not the neutral, which is what an electric shock looks like electrically. It belongs where water is.
AFCI protects the building: it listens for the signature of an arc, which is what a loose connection or a damaged cable does before it starts a fire. Bedroom circuits call for it for that reason.
What dedicated actually means
One circuit, one load, nothing else on it. It is what a microwave, a freezer, a sump pump, a treadmill or a workshop tool needs so a nuisance trip is not sharing blame with four other things.
The run is sized to the load, the protection matched to the location, and the breaker labeled with what it feeds so the next person is not guessing at the panel.
What gets left behind when the work is done
A labeled panel, accessible junctions, the old parts if you want to see them, and a straight account of anything found along the way that was not part of the call.
Where something else was found, you get told what it is and whether it needs doing now, later or not at all. That third answer is a real answer and it gets used.
Why the diagnosis comes before the quote
A symptom has several possible causes with very different prices, and the only thing that separates them is a measurement. Quoting the expensive one covers the risk; quoting the cheap one and finding the expensive one mid-job is worse.
So the reading happens first, you are told what it says, and then the work is scoped to it. Where the honest answer is the small repair, that is the answer you get, even when the larger job pays better.
“Clint did an excellent job installing two bathroom exhaust fans. He installed high-quality fans that were far superior to the ones I had purchased from a big box store. I highly recommend his services.”
David Hinners · Google review
How the visit goes
- The call
What tripped, or what you want to plug in that there is nowhere to plug in.
- The measurement
Tracing the circuit to find everything already on it, then checking box fill, gauge and existing protection.
- The finding
Whether this is a new dedicated circuit or a device swap, and whether protection needs upgrading for the location.
- The work
Circuit run and terminated properly, devices installed tight rather than backstabbed, protection matched to location, and every outlet on the circuit tested.
What the job includes
- Tracing the existing circuit before anything is added
- Correct protection for the location, GFCI or AFCI as the code calls for
- Dedicated circuits where an appliance needs one
- Box fill and wire gauge checked and corrected
- Devices installed level and tight, not backstabbed
- Testing at every outlet on the circuit
What it does not
- Appliance installation beyond the connection
- Cabinet or countertop modification
- Low-voltage data unless it is part of the same job
If the fix belongs to another trade, you get the name of one rather than a price from this one. Recent jobs are worth a look before you call.
Related outlets & circuits work
Dedicated Circuit Installation across the metro
Five jurisdictions, five different sets of conditions. Clint works out of O’Fallon across five jurisdictions, and the same service means different work in each.
St. Louis City
Brick with plaster over lath, party walls that limit where a run can go, and a hundred years of electrical layers in the basement.
Lincoln County
Distance is the design factor out here. A run to a shop or a well house is often hundreds of feet, which makes voltage drop a real calculation rather than a textbook one.
Warren County
Warren County mixes newer builds with older farm properties, and generator work comes up more often there than it does in town.
Thirty towns across five jurisdictions, all on the service areas page.
Questions worth asking first.
Why is my outlet warm?
Heat at a device means a loose or backstabbed termination arcing, and it does not resolve itself. That one gets looked at promptly rather than scheduled out.
Can you add an outlet without opening the wall?
Usually, depending on framing, insulation and fire blocking in the cavity. You get a straight answer about which before the work starts.
Why does my kitchen breaker keep tripping?
Usually too much on one circuit rather than a fault. Tracing the circuit shows what is sharing it, and a dedicated circuit for the heavy appliance normally ends it.
How long have you been doing this?
Clint has seventeen years in the trade and has been running his own shop out of O’Fallon since 2022.
What do your reviews say?
5.0 from 94 Google reviews, and A+ accreditation with the BBB held since 2022. The reviews are on the reviews page with links to where each was posted.
Ask what it actually reads.
You get the figure and what it means, before any work is agreed. Dedicated Circuit Installation in O’Fallon and across the metro.
Mon-Thu 8-5 · Fri 8-4 · Sat 10-3. Emergencies outside that are still worth the call, or message instead.