Home / Safety / Partial Power Loss Repair
Partial Power Loss Repair
An inspection list is a to-do list with a deadline attached. Most electrical faults announce themselves before they fail, in heat, smell or a breaker that keeps tripping.
Partial Power Loss Repair in O’Fallon and across St. Charles, St. Louis, Lincoln and Warren counties.
Owner-operated: the person who answers the phone is the person who measures it.
5.0 from 94 Google reviews · BBB A+ since 2022
What this work actually involves
The fault is located with a meter and a plan rather than by swapping components until something changes.
First the reading, then the explanation, then the repair scoped to what was actually found. If that turns out smaller than the job you called about, that is what you are charged for.
Work needing a permit gets one and work needing an inspection is left ready for it. There is no handoff between whoever quotes and whoever fixes, because they are the same person.
When people call about this
- Warm cover plates
- A burning smell near a panel or outlet
- A breaker that will not stay set
- Lights flickering on unrelated circuits
Why people choose Clint for it
A one-person shop cannot be in two places at once, so you get a real date instead of a window. What you also get is the same person every time.
Seventeen years in the trade, four of them on his own, 5.0 from 94 Google reviews and an A+ BBB accreditation since 2022.
Where this is done
Out of O’Fallon across five jurisdictions: St. Charles County, St. Louis County, St. Louis City, and Lincoln and Warren counties. About fifty miles in any direction.
See the full service area, or the rest of our safety & code work.
What an inspector is actually reading
Grounding and bonding, protection in wet locations, the panel with its cover off, terminations at large loads, and the specific hazards this housing stock produces. That short list is most of any inspection report in this metro.
Working from their written items keeps a correction honest and the re-inspection short. Opinions about what else might be wrong are a separate conversation and get flagged as such.
Inspection lists and closings
An inspection report is a to-do list with a deadline attached. The items get corrected, permitted where the municipality requires it, and re-inspected so the file closes before the closing date.
Requirements differ between St. Charles County and the St. Louis municipalities, which is worth knowing before a date is agreed.
Whole-house outages that are not the utility
When the neighbours have power and you do not, the cause is between the meter and the main: the service conductors, the meter, the main breaker or the lugs.
That is measured with the cover off and the utility coordinated when the fault is on their side of the connection. You get told which side it is on.
Half the house dead is a specific symptom
Losing power to roughly half the house, often with dim or odd-voltage lights on the dead side, is the signature of one lost leg of the service or a failing neutral. It is not a tripped breaker.
It gets measured at the service before anything inside is touched, because the cause is frequently on the utility side and reporting it correctly saves the whole visit.
What happens to a written finding
A report that is just a list of concerns is hard to act on. One that separates hazards from code items from things that are merely old gives you a decision you can actually make, and a document a buyer or insurer will accept.
That is the form the written findings take here, with the reading next to each item.
“Clint came out installed me a large 200 amp panel put some new dedicated lines in my basement and garage he did great clean work all inspections passed he was thorough and knowledgeable. I will have him back out again.”
Jason Holtzman · Google review
How the visit goes
- The call
What you are seeing, smelling or hearing, and when it started. Heat and smell move you up the day.
- The measurement
Reproduce the symptom, then divide the circuit until the fault is on one side of the split. Measurement at the panel and at the point of failure.
- The finding
What it was, with the reading. Including when the answer is one loose connection rather than the rewire you were braced for.
- The work
Correction scoped to the finding, permitted and re-inspected where the municipality requires it, and documentation you can hand to an inspector or a buyer.
What the job includes
- Reproducing the symptom before anything is replaced
- Measurement at the panel and at the fault
- A plain-words finding with the number that supports it
- Correction scoped to the finding, nothing bundled
- Permit and re-inspection where a municipality requires it
- Documentation you can hand to an inspector or a buyer
What it does not
- Replacing parts that test sound
- Opinions where a measurement is possible
- Work outside electrical, though we will say who to call
Plumbing, HVAC and structural work get a pointer to someone who does them properly. There is a gallery of finished jobs, and a form if that is easier than calling.
Related safety & code work
Partial Power Loss Repair across the metro
Where the house is changes what the work involves. Clint works out of O’Fallon across five jurisdictions, and the same service means different work in each.
Lincoln County
Distance is the design factor out here. A run to a shop or a well house is often hundreds of feet, which makes voltage drop a real calculation rather than a textbook one.
Warren County
Which of those you have changes the entire conversation, so the first visit establishes what is actually there rather than assuming from the address.
St. Charles County
The subdivisions here were wired correctly for what houses drew at the time. A charger, a heat pump and a finished lower level later, the arithmetic no longer works out.
Thirty towns across five jurisdictions, all on the service areas page.
Questions worth asking first.
There is a burning smell near my panel. What should I do?
Treat that as urgent. Turn off what you safely can and call. Heat and smell at a panel or outlet are the two symptoms that should never wait for a scheduled visit.
Can you handle the items on my inspection report?
Yes. Send the report. The items get corrected, permitted where the municipality requires it, and re-inspected so the file closes before your closing date.
My lights flicker across the whole house. Is that urgent?
Potentially. A whole-house flicker, especially when a large motor starts, can mean a failing service neutral, which can damage equipment. That gets measured at the panel before anything inside is touched.
Who actually shows up?
Clint Ehman. Infinity Electric is owner-operated, so the person who answers the phone is the person who measures your panel and pulls the permit. There is no dispatcher and no commissioned salesman.
Are you licensed and insured?
Licensed, bonded and insured, with workers compensation coverage, and accredited A+ with the BBB since 2022.
Talk to the person who will do the work.
No dispatcher, no salesman. Clint takes the call and Clint does the job. Partial Power Loss Repair in O’Fallon and across the metro.
Mon-Thu 8-5 · Fri 8-4 · Sat 10-3. Prefer to write it down? Write it here.