Home / Automation / Home Theater Wiring
Home Theater Wiring
Cameras and doorbells need power planned, not improvised. Low voltage is still wiring. Done well it is invisible; done poorly it is a wall full of cable nobody can trace.
Home Theater Wiring in O’Fallon and across St. Charles, St. Louis, Lincoln and Warren counties.
No dispatcher and no commissioned salesman. Seventeen years in the trade, four of them on his own.
5.0 from 94 Google reviews · BBB A+ since 2022
What this work actually involves
Runs are labeled at both ends, so the next person can trace them without opening every wall plate.
First the reading, then the explanation, then the repair scoped to what was actually found. If that turns out smaller than the job you called about, that is what you are charged for.
Work needing a permit gets one and work needing an inspection is left ready for it. There is no handoff between whoever quotes and whoever fixes, because they are the same person.
When people call about this
- A doorbell with no transformer
- Cameras on extension cords
- A remodel wanting structured wiring
- Wi-Fi that dies at the garage
Why people choose Clint for it
One person does the diagnosis and the repair, so nothing is lost between a salesman and a technician, and nobody is paid to sell past the finding.
Seventeen years in the trade, four of them running his own shop, 5.0 from 94 Google reviews, and an A+ BBB accreditation held since 2022.
Where this is done
Out of O’Fallon across five jurisdictions: St. Charles County, St. Louis County, St. Louis City, and Lincoln and Warren counties. About fifty miles in any direction.
See the full service area, or the rest of our smart home & low voltage work.
What still works when the internet is down
A device with local control keeps switching when the connection drops. A cloud-only device becomes a wall plate, and the people who find that out during an outage are never pleased.
That is worth deciding before anything is bought. The install is the same either way; the behaviour when it matters is not.
Box depth, which nobody checks until it is too late
Smart devices are deeper and bulkier than what they replace, and the existing box is frequently too shallow once the conductors are folded back in. Forcing it is how terminations get stressed.
Depth and box fill get checked first, and where a box is too small the honest answer is a deeper box rather than a device crammed in.
Power and signal in the same room
A theatre room wants dedicated circuits for the amplifier and the projector so a motor elsewhere does not show up in the sound, and signal runs kept away from power runs so hum does not.
Conduit or a chase to the projector means the next cable standard does not require opening the ceiling, and that is worth doing at rough-in whatever gets installed now.
What is worth automating and what is not
Lights on a schedule, a thermostat that knows when the house is empty, and a lock you can check from elsewhere all earn their keep. Novelty devices get used for a month.
Deciding that before the wiring is planned keeps the install small and the result something that is still in use in three years.
What gets left behind when the work is done
A labeled panel, accessible junctions, the old parts if you want to see them, and a straight account of anything found along the way that was not part of the call.
Where something else was found, you get told what it is and whether it needs doing now, later or not at all. That third answer is a real answer and it gets used.
“Infinity came out for same day service after an electric line had been cut in my yard. He was able to locate and correct it very quickly, eliminating any risk of injury or additional power outage.”
Melissa Johnson · Google review
How the visit goes
- The call
Which device, which wall, and what it needs to do when the internet is down.
- The measurement
Whether the box has a neutral and the depth for the device, what the existing load is, and the signal at that wall.
- The finding
Which devices will actually work there. Sometimes the answer is a different device, sometimes a transformer, sometimes a new run.
- The work
Wired for local control, runs labeled at both ends, tested on your network rather than at the wall.
What the job includes
- Checking the box for a neutral and for depth before anything is ordered
- Devices wired so they work when the internet does not
- Runs labeled at both ends and documented
- Transformers where an older house lacks one
- Low-voltage terminated in a panel, not a knot
- Testing on the actual network, not just at the wall
What it does not
- Ongoing app and account support
- Internet service and router configuration
- Subscription cameras we have not installed
Anything that is not an electrical problem gets identified as such and handed on. Recent jobs are worth a look before you call.
Related smart home & low voltage work
Home Theater Wiring across the metro
Five jurisdictions, five different sets of conditions. The housing stock changes as you cross this metro, and so does what the job involves.
St. Louis County
Older stock that has been worked on repeatedly, so a panel here has often been added to three or four times by different hands.
St. Louis City
Much of this stock is two and four family, which means shared services and panels that are rarely labeled accurately.
Lincoln County
Lincoln County is rural service: longer drops, well pumps and septic loads that city panels never carry, and outages that make backup power a practical purchase rather than a luxury.
County by county coverage is on the service areas page.
Questions worth asking first.
Will my smart switches work if the internet goes down?
Devices that keep local control will. Cloud-only devices become a wall plate, which is worth knowing before they go in.
Does my box have room for a smart device?
Smart devices are deeper than what they replace, so box depth and fill get checked first. Sometimes the honest answer is a different device.
Why do my smart switches keep dropping offline?
Usually a missing neutral in the box or a weak signal at that wall, not a bad switch. Both are checked before a device is recommended.
Who actually shows up?
Clint Ehman. Infinity Electric is owner-operated, so the person who answers the phone is the person who measures your panel and pulls the permit. There is no dispatcher and no commissioned salesman.
Are you licensed and insured?
Licensed, bonded and insured, with workers compensation coverage, and accredited A+ with the BBB since 2022.
Talk to the person who will do the work.
No dispatcher, no salesman. Clint takes the call and Clint does the job. Home Theater Wiring in O’Fallon and across the metro.
Mon-Thu 8-5 · Fri 8-4 · Sat 10-3. Prefer to write it down? Write it here.